Bosch DIVAR IP 3000 Installation Manual page 15

DIVAR IP 3000
Network settings page
You configure the network settings of the operating system.
As soon as you click Next button, the settings are activated.
If you have changed any setting on this page, click Reboot to restart the system.
Notice!
If a DHCP server is employed in the network for the dynamic assignment of IP addresses,
activate acceptance of IP addresses automatically assigned to the device.
Certain applications (VRM, Bosch Video Management System, Bosch Video Client,
Configuration Manager) use the IP address for the unique assignment of the device. If using
these applications, the DHCP server must support the fixed assignment between IP address
and MAC address, and must be appropriately set up so that, once an IP address is assigned, it
is retained each time the system is rebooted.
Bosch Sicherheitssysteme GmbH Installation Manual
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
System setup - first steps | en
2013.09 | V2 | DOC
15