PARTS SUPPLIED:
Four flat head wood screws
dishwasher to underside of countertop
(in literature package).
Screw type hose clamps and one drain hose.
2 top mounting clips.
MATERIALS YOU WILL NEED :
Thread seal tape
UL Listed wire nuts (3)
Materials For New Installations Only:
Air gap for drain hose, if required
Waste tee for house plumbing, if applicable
Electrical cable or power cord, if applicable
Screw type hose clamps
Strain relief for electrical connection.
Hand shut-off valve
Water line 3/8" min. copper
Coupler for extending drain line, if applicable
TOOLS YOU WILL NEED:
Phillips head screwdriver
5/16" and 1/4" nutdriver
6" Adjustable wrench
Level
Carpenters square
Measuring tape
Safety glasses
Flashlight
Bucket to catch water when fl ushing the line
Gloves
For New Installations Only:
Tubing cutter
Drill and appropriate bits
Hole saw set
Installation Preparation
to secure
Phillips
Head
Screwdriver
Flashlight
Bucket
Gloves
Mounting Clips
4 Wood Screws
Hand
Shut-Off
90° Elbow,
Valve
Ferrule and
Compression Nut
Electrical Cable
(or Power Cord, if applicable)
Waste Tee
Screw Type
Hose Clamps
Air Gap
1/4"
and 5/16" Nut-
driver
6" Adjustable
Wrench
Safety Glasses
Hole Saw Set
2
Screw Type
2 Top
Hose Clamp
Wire Nuts (3)
Thread
Seal Tape
Hot Water line
Strain Relief
Level
Carpenters
Square
Tubing Cutter
Measuring Tape
Drill and Bits
Drain Hose
Coupler
Need help?
Do you have a question about the SD-6502SS and is the answer not in the manual?
Questions and answers