Line Cross - Idis DC-D3233FRX-N Operation Manual

• Event Action: Select a tampering detection event
alert action.
- Alarm Out: Select if you wish to generate an alarm
out.
- Send Email: Select if you wish to send an email.
Select the Image Attachment option to attach a
.jpg image of the event detected to the email.
- Remote Callback: Select this option to send a
message to a remote system and then select which
system to send the message to.
• Not supported from the IDIS Web program.
• The camera must be registered to the remote
system in order to use the Remote Callback
feature.
- Audio Alarm: Select this option to generate an
audio alert and then choose an audio file (.wav).
- FTP Upload: Select this option if you wish to
upload images to the FTP server.
- Record: Select this option to record video.
Event Action settings must be configured correctly
in order to perform event actions.

Line Cross

Select Line Cross and configure line cross settings.
With line cross event enabled, an event is considered
when an object is detected to move a set line in a set
DC-D6233FRX, DC-D6233FX only
direction.
• Line: Click Setup and define up to 8 lines and
directions.
- Select / Unselect: Select/unselect lines.
- Line Cross Direction: Select the direction in which
the object to be considered an event is skipped.
is when a movement is made from A to B on a
line basis, is when a movement is made from A
to B on a line basis, and
made in both directions.
• Ignore Interval: With Line Cross Ignoring Interval
configured, no event log or notification is generated
for line crosses detected during a period of time
following a line cross event.
• Use Ignoring Time: Define the event ignoring time.
Line cross detections taking place during the defined
time range will not be assumed as events.
• Object Calibration: Set the camera's mounting
position, sensitivity, and the maximum and minimum
size of the object to recognize the object more
accurately.
- Zone: Select the maximum and minimum size of
the object to be measured.
- Mount Type: Set the appropriate value for the
installed camera position. Wall is selected when the
camera is installed on the wall, and Ceiling is when
the camera is installed on the ceiling. Depending on
the installed location, the recognition rate may vary.
- Sensitivity: Select sensitivity for object
measurement.
Part 1 - Remote Setup
is when a movement is
37