What To Do If Your Appliance Does Not Work - Moulinex LM91HD10 Manual

WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK ?

Problems
Appliance does
not work
The appliance
stopped while
in use
Excessive
vibrations
Leak from the lid
Leak from the
bottom of the
blender jug
The blades do not
turn easily
Leak from the
bottom of the OTG
bottle
Causes
The plug is not connected.
The blender jug is not
positioned correctly on the
motor unit.
The power switch is on OFF
position.
In case of software bug.
Overload
The product is not placed
on a flat surface.
Volume of ingredients is
too high.
Volume of ingredients is
too high.
The lid is not correctly
positioned
The blades are not
correctly positionned
Pieces of food too large or
too hard.
The blended liquid is too
hot and distorted the
silicone gasket.
The blades are not
correctly positionned
Solutions
Connect the appliance to a socket with
the same voltage as indicated on the
rating plate of the appliance.
Check that the blender jug is positioned
properly on the motor unit as explained
in the instructions.
Follow the instructions for starting your
appliance.
Unplug the appliance, wait few minutes
and plug in again.
Follow the instructions in section
Overload.
Place the appliance on a flat surface.
Reduce the quantity of ingredients
processed.
Reduce the quantity of ingredients
processed.
Place the lid correctly on the blender
jug.
Fit the locking ring (B3, C3) (Fig. 2) and
lock it by rotating to lock notch in the
clockwise direction (Fig. 2).
Make sure the locking ring is locked
correctly : the point on the jar must be
aligned with the lock (Fig 9)
Reduce the size or quantity of
ingredients processed.
Replace the gasket with a new one.
Place the blades unit on the top of the
bottle and lock it by rotating to lock
notch in the clockwise direction (Fig. 9).
EN
55