Cleaning Your Appliance; What To Do If Your Appliance Does Not Work - Moulinex UNO LM220510 Manual

SM_BLENDER_UNO_EO_8080013792_Mise en page 1 12/06/14 10:20 Page6

CLEANING YOUR APPLIANCE

• Unplug the appliance and remove
the accessories.
• The blades of the accessories are
very sharp. Handle them with
caution.
• Remove the jug (C) and rinse it
and its lid (D) under running water.
• To clean the motor unit (A), use a
moist cloth. Dry it carefully.

WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK

PROBLEMS
Product does not work
Excessive vibrations
Leak from the lid of the
bowl
Leak from the base of
the accessories
The blade does not turn
easily
*depending on model
YOUR BLENDER STILL DOES NOT WORK?
Contact an approved service centre
(see list in service booklet).
HELPLINE: UK and ROI
0845 602 1454 – UK
(01) 677 4003 – ROI
or consult our web site:
www.moulinex.co.uk
• Never immerse the motor unit (A) in
• The jug (C), accessories (F, G, H) and
CAUSES
The plug is not connected
The blender jug or assembled
accessory is not correctly
positioned or locked on the
motor unit.
The product is not placed on a
flat surface
Volume of ingredients is too
high
Volume of ingredients is too
high
The lid is not correctly
positioned
F or G or H
The blade unit (
is not locked correctly in the
I *
bowl ( )
Pieces of food too large or too
hard
You can customise your blender and
obtain the following accessories from
your usual dealer or from an
approved service centre: spice
grinder (F), grater (G), herb grinder
(H) or an additional blender jug (C).
6
running water.
the bowl (I) can be cleaned with hot
soapy water or in the dishwasher in
the top basket with the "ECO" or
"LIGHTLY SOILED" programme.
SOLUTIONS
Connect the appliance to a
socket with the same voltage
Check that the jug or
accessories are correctly
positioned and locked on the
motor unit as shown in Fig. 2 or 4
Place the product on a flat
surface
Reduce the quantity of
ingredients processed
Reduce the quantity of
ingredients processed
Lock the lid correctly on the
blender jug
*
Check that the blade unit is
)
locked correctly on the bowl
fig. 3
( )
Reduce the size or quantity of
ingredients processed Add
liquid if appropriate