Before Using Your Appliance For The First Time - Moulinex LM91HD10 Manual

DESCRIPTION
A 1 Middle cap
2 Lid
3 Plastic Tritan Jar
B* 1 Seal
2 Powelix blades unit
3 Locking ring
C* 1 Seal
2 Powelix life blades unit with titanium
coating
3 Locking ring
D Motor unit
E* 1 On the go bottle lid
2 On the go bottle
3 Seal
4 Powelix life blades unit with titanium
coating
5 Locking ring
CAUTION:
The safety precautions are part of the appliance. Read them carefully before using your new
appliance for the first time. Keep them in a place where you can find and refer to them later on.
The appliance will only start if the jar or the bottle is correctly positioned on the motor unit (D)
and the lid locked on the jar.

BEFORE USING YOUR APPLIANCE FOR THE FIRST TIME

Before using your appliance for the first time, rinse the parts that come into contact with food
(jar, bottle, lids and middle cap) with soapy water.
CAUTION: Do not immerse the appliance in water (neither the motor unit nor the jar base).
Never put the motor unit (D) under running water. Clean it with a damp cloth and dry it
carefully. The blades are extremely sharp.
Make sure all the packaging has been removed before operating the appliance.
ASSEMBLING AND FITTING THE JAR
Moisten the seal (B1, C1) (even if already fitted on the blade unit (B2, C2)). Be careful to
correctly fit the seal (B1, C1) back onto the blades unit (B2, C2) the correct way up.
Check the seal is in place on the blades unit. Place the blades (B2 or C2) on the locking ring (B3
or C3) (Fig 1). Turn the jar upside down and fit the locking ring with blades on the base of the jar
50
F Tamper
G Start/Stop button
H Screen
I Blender jar lock indicator
J On the go bottle lock indicator
K Control display
L Setting button
M Blend button
N Clean button