Description Of The Appliance; Before Using Your Appliance For The First Time - Moulinex Ultrablend LM935E10 Manual

SM_BLENDER_HI-SPEED_8080016923.qxp_Mise en page 1 17/11/2016 09:11 Page1

DESCRIPTION OF THE APPLIANCE

Measuring cap
1.
Lid
2.
Jug
3.
Removable silicone gasket
4.
Motor unit
5.
Pusher
6.
Power button
7.
Screen
A.
Start button
B.
Time settings
C.
Speed settings 1- 10
D.
CAUTION: the safety precautions are part of the appliance.
Read them carefully before using your new appliance for the
first time. Keep them in a place where you can find and refer to
them later on.
Warning:
The appliance will only start if the jug is correctly positoned on the
motor unit (5).

BEFORE USING YOUR APPLIANCE FOR THE FIRST TIME

• Before using your appliance for the first
time, hand-wash the parts that come
into contact with food (jug, lid and
measuring cap) in warm soapy water
except for the motor unit.
ATTENTION: DO NOT IMMERSE THE MOTOR
UNIT/CONTROL PANEL OR PUT IT UNDER
WATER OR ANY OTHER LIQUID. Clean with
USING YOUR APPLIANCE
• Put the appliance on a flat, stable,
heat-resistant
sources of heat or water splashes.
• Make sure the silicone gasket is in place
on the motor unit. Position the jug
correctly on the motor unit.
• Add the ingredients into the assembled
jug without exceeding the maximum
level indicated: 2L. It is recommended
to half-fill the jug (1L) for foamy food.
• After making hot soup, wait until the jug
cools down between 2 recipes.
surface away from
Smoothie program
E.
Hot Soup Program
F.
Nuts Program
G.
Pulse button
H.
Ice crush Program
I.
Sorbet Program
J.
Autoclean Program
K.
On LCD screen :
represents the last and highest
"H"
speed (10 )
a damp cloth and dry it carefully.
CAUTION: The blades are extremely
sharp and not removable.
• Make sure all the packaging has been
removed before
appliance.
• Do not operate the blender if the lid is
not in place.
• Less than 3 minutes of mixing are
enough to blend liquids for most of the
recipes.
• Lock the lid on the jug. Place the
measuring cap in position on the lid
and lock it by rotating it.
• To add ingredients while blending,
remove the measuring cap from the lid
and add the ingredients through the
feeder hole. Beware of the risk of
spatter.
1
EN
operating the