Fuser Unit - Samsung ProXpress M387 Series Service Manual

3. Disassembly and Reassembly

3.3.13. Fuser Unit

CAUTION
The temperature gets high in the vicinity of the fuser unit.
When replacing it, you may get burned. Before replacing
it, make sure that fuser unit has cooled.
1. Remove the rear cover.
2. Open the Frame-Rear by pushing both green points.
3. Remove the Frame-Rear by releasing both hooks.
3-15
4. Remove the exit sensor holder after removing 2 screws.
5. Remove 4 screws.
6. Release the fuser unit.
CAUTION
When reassembling the fuser unit, do not forget to
tighten these screws.
Copyright© 1995-2013 SAMSUNG. All rights reserved.