London Electronics INTUITIVE INT4-S Installation & Operating Manual page 2

Warranty
.
We warrant this product against defects in materials or workmanship for a period of three
(3) years from the date of purchase.
In the event of a defect during the warranty period, the unit should be returned, freight (and
all duties and taxes) prepaid by the Buyer to the authorised distributor from where the unit
was purchased.
The Distributor, at its option, will repair or replace the defective unit. The unit
will be returned to the Buyer with freight charges prepaid by the distributor.
LIMITATION OF WARRANTY
The foregoing warranty shall not apply to defects resulting from:
1. Improper or inadequate maintenance by the buyer.
2. Unauthorised modification or misuse.
3. Operation outside the environmental specification of the product.
4. Mishandling or abuse.
The warranty set forth above is exclusive and no other warranty, whether written or oral is
expressed or implied. We specifically disclaim the implied warranties of merchantability
and fitness for a particular purpose.
EXCLUSIVE REMEDIES
The remedies provided herein are the buyer's sole and exclusive remedies.
In no event shall we be liable for direct, indirect, incidental or consequential damages
(including loss of profits) whether based on contract, tort or any other legal theory.
INT4 = Intuitive Mark 4 family
S2 = RS232 input,
Analogue output:
Alarm outputs:
Serial data:
Display colour:
Power:
Mounting:
2
S4 = RS485 input
0=none, ANB=-10to+10V, ANI=4-20mA, ANV=0-10V
0=none, AL2= 2 relays,
0= none, 232=RS232,
R=Red, G=Green
AC=100-240V AC, DC=11-30V DC
0 = Standard panel DIN
Ordering code:
AL4=4 relays
485=RS485
= DIN rail mounting
INT4-X-X-X-X-X-X-X