Target Halsted FTS81068C Assembly Instructions Manual page 7

step 01:
(Part C)×8
M8*35mm screw with washer
ATTENTION: To avoid damage to your new patio furniture, please
use either the carton or another soft surface such as carpet as a
working surface to prevent product damage during assembly.
1. Attach the table leg (B) to the table top (A) by lining up the bolt holes on the ends of the table leg (B)
with the correspoding bolt holes on the back side of the table top (A).
Secure with M8*35mm scre w with washer (C) , tighten using M8 wrench (D).
Repeat this step until all four table leg (B) are secured to the table top (A).
Do not completely tighten screws until all screws are started.
(Part D)×1
M8 wrench
7