Subscribe to Our Youtube Channel
Related Manuals for Target Southport FTS70837A
Summary of Contents for Target Southport FTS70837A
- Page 1 Southport Dining Table style # FTS70837A dpci # 009000845 >>assembly instructions...
-
Page 2: Important Warning
Congratulations on your latest Target purchase. Now what? Don't start sweating over this box of parts. This will be easy. We did the hard work for you. All you need to do is follow our simple instructions and you'll be on your way to transforming your patio in no time. -
Page 3: Warranty
This Table comes with a one year limited warranty against original manufacture defects. If you experience trouble with your new table, please call the customer service number below. Target Corporation Toll Free at: 855-MYTGTHOME (855-698-4846) during 7am - 7pm CST M-F, and 8am - 5pm CST Saturday. - Page 4 table of contents introduction hardware parts list assembly 7-10 QUESTIONS? Please call 855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number r eady when calling.
- Page 5 hardware (Part F)×8 (Part H)×8 (Part E)×8 (Part G)×8 (Part I)×1 M6 nut M6*40mm screw with washer allen wrench M6*15mm screw with washer washer (Part J)×1 wrench...
-
Page 6: Description Quantity
ITEM DESCRIPTION QUANTITY hole cover table top connected bracket table leg... - Page 7 step 01: (Part F)×8 (Part E)×8 (Part G)×8 M6*40mm screw with washer M6*15mm screw with washer washer (Part H)×8 (Part I)×1 (Part J)×1 M6 nut allen wrench wrench ATTENTION: To avoid damage to your new patio furniture, please use either the carton or another soft surface such as carpet as a working surface to prevent product damage during assembly.
- Page 8 step 02: (Part F)×8 (Part E)×8 (Part G)×8 M6*15mm screw with washer M6*40mm screw with washer washer (Part H)×8 (Part I)×1 (Part J)×1 M6 nut allen wrench wrench 1. Attach the connected bracket (C) to the table leg (D) by lining up the bolt holes on the connected bracket (C) with the correspoding bolt holes on the middle of the leg (D).
- Page 9 step 03: 1. Tighten all the screws. Return table to upright position onto a flat level surface. put the hole cover(A) on the hole of the table top (B).
- Page 10 step 04: You are now ready to enjoy your new table...
- Page 12 The Bullseye Design is a trademark of Target Brands Inc. All rights reserved.
Need help?
Do you have a question about the Southport FTS70837A and is the answer not in the manual?
Questions and answers