Connecting The Camera To A Printer; Setting The Print Mode Menu - Minolta MN12Z User Manual

Connecting the Camera to a Printer

You can print your images directly using a PictBridge compatible printer.
1. Turn on your Printer. Check that
the printer is turned on, there is
paper in the printer, and there are
no printer error messages.
2. Connect one end of the USB cable
to the printer while the other end
to USB terminal on the camera.
3. Enter the print mode and print the
selected images.
For details on the following page "Setting the Print Mode Menu".

Setting the Print Mode Menu

Print Mode menu appears on the screen after the connection between a printer
and your camera is established.
Print Mode includes three major settings:
Print Select. An image can then be

selected to print.
Print All. Prints all images.

Print DPOF. Prints the images which are

set DPOF.
To set Print Select
1. Use the or
an image for printing.
2. Specify the number of copies. Use the
key to increase/decrease number.
3. Press the OK button to enter printer
settings.
To set Print All and Print DPOF
Repeat the same steps 1 to 2, then enter printer
settings.
keys to scroll and select
85
or