WAN Port (WAN): Use this port to connect to a router, DSL modem, or Cable modem. Reset: Reset the Bandwidth Management to the original default settings. DC Power: Connect one end of the power supply to this port, the other end to the electrical wall outlet. English OvisLink RS-1000...
Page 4
A pop-up screen will appear and prompt for a username and password. A username and password is required to connect to the Security Bandwidth Management. Enter the default login username (admin) and password (admin) of Administrator. English OvisLink RS-1000...
Page 5
IP address information provided to you by the ISP. STEP 2: Click on the Policy tab from the main function menu, and then click on Outgoing from the sub-function list. STEP 3: Click on New Entry button. English OvisLink RS-1000...
Page 6
LAN IP Address (i.e. 192.168.1.1). At this point, all the computers on the LAN network should gain access to the Internet immediately. If a Security Bandwidth Management filter function is required, please refer to the Policy section in the user manual. English OvisLink RS-1000...
Page 7
Step 4: Click on the Policy tab from the main function menu, and then click on Outgoing from the sub-function list. Click on the Policy tab from the main function menu, and then click on Incoming from the sub-function list. English OvisLink RS-1000...
Page 8
Security Bandwidth Management’s LAN IP Address (i.e. 192.168.1.1). At this point, all the computers on the LAN network should gain access to Internet immediately. If a Bandwidth Management filter function is required, please refer to Address and Policy sections. English OvisLink RS-1000...