Advertisement
STEP 4:
When the New Entry option appears, enter the following configuration:
Source Address – select Inside_Any
Destination Address – select Outside_Any
Service - select ANY
Action - select Permit
Click on OK to apply the changes.
STEP 5:
The configuration is successful when the screen below is displayed. Make
sure that all the computers that are connected to the LAN port have their
Default Gateway IP Address set to the Security Bandwidth Management's
LAN IP Address (i.e. 192.168.1.1). At this point, all the computers on the
LAN network should gain access to the Internet immediately. If a Security
Bandwidth Management filter function is required, please refer to the Policy
section in the user manual.
OvisLink
RS-1000
English
5
5
Advertisement
