Advertisement
Step 5: Click on New Entry button.
Step 6: When the New Entry option appears, enter the following
configuration:
Source Address – select Inside_Any
Destination Address – select Outside_Any
Service - select ANY
Action - select Permit
Click on OK to apply the changes.
Step 7: The configuration is successful when the screen below is
displayed. Make sure that all the computers that are connected to
the LAN port have their Default Gateway IP Address set to the
Security Bandwidth Management's LAN IP Address (i.e.
192.168.1.1). At this point, all the computers on the LAN network
should gain access to Internet immediately. If a Bandwidth
Management filter function is required, please refer to Address and
Policy sections.
OvisLink
RS-1000
English
7
7
Advertisement
