Advertisement
WebUI Configuration example
STEP 1:
Connect both the Administrator's PC and the LAN port of the Security
Bandwidth Management to a hub or switch. Make sure there is a link light
on the hub/switch for both connections. The Security Bandwidth
Management has an embedded web server used for management and
configuration. Use a web browser to display the configurations of the
Security Bandwidth Management (such as Internet Explorer 4(or above) or
Netscape 4.0(or above) with full java script support). The default IP address
of the Security Bandwidth Management is 192.168.1.1 with a subnet mask
of 255.255.255.0. Therefore, the IP address of the Administrator PC must
be in the range between 192.168.1.2– 192.168.1.254
If the company's LAN IP Address is not subnet of 192.168.1.0, (i.e. LAN
IP Address is 172.16.0.1), then the Administrator must change his/her
PC IP address to be within the same range of the LAN subnet (i.e.
172.16.0.2). Reboot the PC if necessary.
By default, the Security Bandwidth Management is shipped with its DHCP
Server function enabled. This means the client computers on the LAN
network including the Administrator PC can set their TCP/IP settings to
automatically obtain an IP address from the Security Bandwidth
Management.
The following table is a list of private IP addresses. These addresses may
not be used as a WAN IP address.
10.0.0.0 ~ 10.255.255.255
172.16.0.0 ~ 172.31.255.255
192.168.0.0 ~ 192.168.255.255
STEP 2:
Once the Administrator PC has an IP address on the same network as the
Security Bandwidth Management, open up an Internet web browser and
type in
http://192.168.1.1
A pop-up screen will appear and prompt for a username and password. A
username and password is required to connect to the Security Bandwidth
Management. Enter the default login username (admin) and password
(admin) of Administrator.
OvisLink
RS-1000
in the address bar.
English
3
3
Advertisement
