Information For Installation - John Lewis JLWM1437 User Manual

5. Remove the polystyrene protection from the bottom.
Put the appliance back into an upright position.
1
7. Remove the three transit bolts and pull out the plastic
spacers.
We recommend that you
keep the packaging and the
transit bolts for any transport
of the appliance.

Information for installation

1. Positioning and levelling
Correctly adjusting the appliance so that it is
level prevents vibration, noise and movement of
the appliance when in operation.
1. Install the appliance on a flat hard floor. The
appliance must be levelled and stable. Make sure
that the appliance does not touch the wall or
other units and there is air circulation below the
appliance.
Washing Machine User Manual
6. Remove the power supply cable and the drain hose
from the hose holders.
It is possible to see water flowing from the drain hose. This is
because the washing machine has been tested at the
factory.
2
8. Put the plastic caps, that you find in the user manual
bag, in the holes.
2. Loosen or tighten the feet to adjust the level.
All feet must rest firmly on the floor.
x4
9