Table of Contents
Advertisement
3. Check your adjustments
Use a spirit level to check your adjustments. Place the level diagonally on the oven rack, and check
each direction for level.
FinAliZinG thE instAllAtion
• Move range close enough to the opening to plug into the receptacle.
• Slide range into position insuring that the rear left(or rear right) leg slides under the Anti-Tip bracket.
The range will sit 0" away from the back wall when properly installed.
• Carefully tip the range forward to insure that the Anti-Tip bracket engages the back brace and
prevents tip-over.
• Turn on the electrical power. Check the range for proper operation as described in the user manual.
12_ Installing the range
Installation-USA DG68-00108E-01_EN.indd 12
1. Check direction 1.
2. Check direction 2.
If the spirit level doesn't show level on the rack, adjust the
leveling legs with a wrench.
Anti-Tip bracket
Leveling leg
DG68-00108E-01_EN
2011-03-18
4:06:29
Hide quick links:
Advertisement
Table of Contents
