ANCHOR
PATTERN
MACHINE GROUTING
After concrete has cured completely and anchors have cured completely
into place:
1)
Position washer over the mounting anchors.
2)
Raise the washer 1/2" [12.7] off the mounting surface and place
spacers under the corners of the washer base.
3)
Level the washer, leaving washer at least 1/2" [12.7] off the
mounting surface.
Do not permanently support the washer with spacers under the
corners. Machine must be grouted, and spacers must be removed.
8514-302-001 REV B page 12