Technical Information; Installation Considerations - Hans Grohe Croma E 100 VarioJet 04331 0 Series Installation/User Instructions/Warranty

Croma E 100 VarioJet
Croma C 100 3-Jet
Croma E 75 3-Jet

04331XX0
04333XX0
04335XX0
English

Technical Information

Max. flow rate
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.

Installation Considerations

• For best results, Hansgrohe recommends that
this unit be installed by a licensed, profes-
sional plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
• To prevent scald injury, the maximum output
temperature of the shower valve must be
no higher than 10°F. In Massachusetts,
the maximum output temperature can be no
higher than 11° F.
• Keep this booklet and the receipt (or other
proof of date and place of purchase) for
this product in a safe place. The receipt is
required should it be necessary to request
warranty parts.
.0 GPM