Related Manuals for ZKTeco FHT 2300
Summary of Contents for ZKTeco FHT 2300
- Page 1 Full Height Turnstile User Manual Applicable Models: FHT 2300 / 2400 Version: 1.2 Date: Mar. 2019...
-
Page 2: Table Of Contents
Contents Chapter 1 Product Introduction ....................1 1.1 Model number and access control ................1 1.2 Structures and dimensions ..................... 1 1.3 Mechanical system of FHT2300&FHT2400 series ............. 2 1.4 Electronic control system ....................2 1.5 The working principle of full height turnstiles ............... 3 1.6 Product related parameters .................... -
Page 3: Chapter 1 Product Introduction
Chapter 1 Product Introduction 1.1 Model number and access control Access C3-200 with two KR101E InBio260 with two FR1200/ID reader reader Model FHT2300 √ FHT2311 √ FHT2322 √ FHT2400 √ FHT2411 √ FHT2422 √ 1.2 Structures and dimensions FHT2000 series has stainless steel casing, which provides corrosion resistance and durability. -
Page 4: Mechanical System Of Fht2300&Fht2400 Series
FHT2400’s appearance and dimensions are as shown in Figure 1-2B： Figure 1-2B 1.3 Mechanical system of FHT2300&FHT2400 series The mechanical system of the full height turnstiles includes a mainframe box and a frame. The direction indicator, core, control panel, access controller and lock are installed in the mainframe box. -
Page 5: The Working Principle Of Full Height Turnstiles
1.5 The working principle of full height turnstiles 1.5.1 After the power is turned on, the system will perform self-check. If no fault is detected, the device will operate as usual. If a fault is detected, the system will display the related messages on the LCD screen. -
Page 6: Chapter 2 The Installation Of The Device
Chapter 2 The Installation of the Device 2.1 Installation notes 2.1.1 It is recommended that the full height turnstile should be installed on a cement platform with 50mm to 100mm in height. 2.1.2 It is recommended that the full height turnstile should not be used in corrosive environments. - Page 7 this full height turnstile is AC100-120V/200-240V. The PVC conduits are buried 100mm below the ground, with the height of the exposed part not not less than 100mm. To prevent water leakage to the conduit, the conduit mouth needs to be bent back. FHT2300&FHT2400 series installation holes are as shown in Figure 2-3A and Figure 2-3B.
- Page 8 Put the installation diagram on the floor. Using percussion to drill holes for M12 screws on the corresponding position. Then install the screws to the corresponding positions. Next, place the frame on top of the screw and fix it. After that, the mainframe-box is fixed on the frame.
- Page 9 Figure 2-3D...
-
Page 10: Chapter 3 Product Maintenance
Chapter 3 Product Maintenance 3.1 Mainframe-box maintenance The mainframe-box is made of 304 stainless steels. So after a long period of operation, its surface may have some stains. It can use gauze to clean the mainframe-box. In order to protect the lines of surface, please wipe along the lines direction. It's best to polish and wax.