Advertisement
Quick Links
Owner's Guide and Installation Manual
Attach sales receipt to this card and retain as your proof of purchase
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
5CSM60XXXD-V1 Series Fan
CUL Model NO. : 5CSM60XXXD-V1
RETAILER NAME:
RETAILER ADDRESS:
12.8 kgs
28.2 lbs
Total fan weight with light
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Monte Carlo Fan Company 5CSM60 D-V1 Series
Summary of Contents for Monte Carlo Fan Company 5CSM60 D-V1 Series
- Page 1 Owner’s Guide and Installation Manual 5CSM60XXXD-V1 Series Fan CUL Model NO. : 5CSM60XXXD-V1 Attach sales receipt to this card and retain as your proof of purchase DATE OF PURCHASE: RETAILER NAME: RETAILER ADDRESS: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 12.8 kgs 28.2 lbs Total fan weight with light...
-
Page 2: Cautions And Warnings
Note: Suitable for use in damp locations. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers Customer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2015 Monte Carlo Fan Company 10/20/2015... - Page 3 Place yoke cover on top housing of fan. Warning: Cross pin and keeper pin must be installed securely, failure to install them will result in serious injury. © 2015 Monte Carlo Fan Company 10/20/2015...
- Page 4 Outlet up into the outlet box. box. Make sure the studs protruding from the bottom of the Mounting bracket are installed with threads all the way through the bracket. © 2015 Monte Carlo Fan Company 10/20/2015...
- Page 5 Safety Cable in the U.S., Do Not Remove the outlet box. The splices after being made Knockouts In The Outlet Box. should be turned upward and pushed carefully up into the outlet box. © 2015 Monte Carlo Fan Company 10/20/2015...
- Page 6 fixture, and then install the light kit onto the top plate connection clasped together completely. with the 3 set screws removed in step 21 and tighten all screws securely. © 2015 Monte Carlo Fan Company 10/20/2015...
- Page 7 Note: Reverse switch must be set either tightening the finial. DO NOT OVER TIGHTEN way completely. If the reverse switch is the finial as glass may crack or break. set in the middle position, fan will not operate. © 2015 Monte Carlo Fan Company 10/20/2015...
-
Page 8: Troubleshooting
5.Remove light kit and check the plug connections if they are present. 6.If this fan uses remote controller, make sure dip switches are setting properly and make CAUTION: Make sure main power is turned off before entering switch housing and/or canopy. © 2015 Monte Carlo Fan Company 10/15/2015... - Page 9 Mar.2019 5CSM60XXD-V1...
Need help?
Do you have a question about the 5CSM60 D-V1 Series and is the answer not in the manual?
Questions and answers