Table of Contents
Advertisement
in the configured area.
Face Exposure: Check the checkbox to enable the Face Exposure. The device
automatically adjusts exposure level when human faces appear in the scene.
Reference Brightness: The reference brightness of a face in the face exposure
mode. If a face in the actual scene is brighter than the set reference brightness,
the device lower the exposure level. If a face in the actual scene is darker than the
set reference, the device increases the exposure level.
Minimum Duration: The extra time the device keeps the face exposure level after
the face disappears in the scene.
Face Filtering Time: It means the time interval between the camera detecting a face
and taking a capture action. If the detected face stays in the scene for less than the set
filtering time, capture will not be triggered. For example, if the face filtering time is set
as 5 seconds, the camera will capture the detected face when the face keeps staying in
the scene for 5 seconds.
Facial Posture Filter: To filter out face of certain postures. The figure on the right of the
slider stands for the posture angle which is acceptable in the face capture action. Click
to display the diagram illustrating the face turning direction when setting up this
filter.
Face Covering Filter: To filter out face with different kinds of coverings. Checked
options are not count in face capture.
Restore Default: Click
factory default.
5.6 Smart Display
Click Smart Display to display captured pictures in face capture function.
Note:
The function requires the support of camera and certain web browser. Adjust your browser
settings according to the pop-up notification.
The layout and information to show are configurable. Click
to restore all the settings in advanced configuration to the
Figure 5-46 Smart Display Interface
to show the configuration page.
Advertisement
Table of Contents
