Maintenance - Hoshizaki DCM-500B H Instruction Manual

III. Maintenance
The appliance must be maintained in accordance with the instruction manual and labels
provided. Consult with your local Hoshizaki Certified Service Representative about
maintenance service.
• Only qualified service technicians should service the appliance.
• To reduce the risk of electric shock, do not touch the power switch or control switch
with damp hands.
• Before Servicing: Move the power switch to the "OFF" position. Turn off the power
supply. Lockout/Tagout to prevent the power supply from being turned back on
inadvertently.
• CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are
securely in place after any maintenance is done to the appliance. Make sure that
none have fallen into the ice storage bin.
Reservoir
Power Switch
Float Switch Assembly
Evaporator Assembly
Ice Storage Bin Cover
CONTROL
ICE
DISPENSE MODE
OFF
DRAIN
Extruding Head
4A1038-014
Safety Switch
PORTION
CONTINUOUS
Fig. 9
Model Shown: DCM-751BWH-OS
WARNING
Spout A
Spout B
Optical Sensors (-OS Models)
24
Ice Guide (DCM-751/752)
Drain Pipe Holder (DCM-751/752)
Drain Pipe (DCM-751/752)
Bin Control Assembly
Agitators
1 on DCM-300/500
2 on DCM-751/752
Dispensing
Auger
Agitating Motors
1 on DCM-300/500
2 on DCM-751/752
Dispensing Motor
Spout Cover