OPERATION
5.
Remove the wing bolts (5) (2 pieces) and remove the vinyl
cover (6).
6.
Remove the bolts (7) (2 pieces) and remove the grease
gun holder (8).
7.
Remove the bolts (9) (2 pieces) and remove the clip.
8.
Loosen the nuts of terminal (10) (2 places) and disconnect
the cable from the battery.
Disconnect the ground cable (normally connected to the
negative (-) terminal) first.
If any tool touches between the positive (+) terminal and
the chassis, there is a hazard of sparks being generated.
9.
Remove the nuts (12) and (13) (2 places each) of the bat-
tery mounting fixture (11), and remove the rods (14) (2 pla-
ces).
10. Remove the bolts (15) (2 pieces), and remove the bracket
(16).
11. Take out the battery (17).
When taking out the battery, move it toward the rear of the
machine.
TROUBLES AND ACTIONS
3-211