Kyocera Mita C2525E Advanced Operation Manual page 137

3 Press [Others].
4 Press [ ] or [ ] to select Auto Continue
and press [Change #].
5 Press [On] or [Off].
6 If [On] is pressed, press [+] or [–] to set
the Auto Continue delay time.
7 Press [Close]. The display returns to the Others screen.
8
Press [Close]. The display is returned to the Printer menu screen.
Setting Stapling Error Detection
Set whether to show an error message during stapling when the staple supply is exhausted.
Mode
On
Off
1 Press the Printer key.
2 Press [Printer Menu].
3 Press [Others].
item.
Font
Page Set
Print
Quality
Others
Form Feed Time Out
Resource Protect
Auto Continue
Finishing Error
Printer menu
Auto continue
When error occurs, auto timing for processing can be set.
Off
On
Printer menu
Description
Displays an error message.
Press [GO] to clear the error message and continue printing without stapling.
Press [Cancel] to cancel printing.
No error message is shown and printing continues without stapling.
item.
Font
Page Set
Print
Quality
Paper
Handling
Color Mode
RAM DISK
Mode
Setting Item Value
30. Sec.
Permanent
Off
Change #
Seconds
(5)
(5)
- Others
Paper
Handling
Color Mode
RAM DISK
Mode
Printer Settings
Close
Others
Service
Back
Close
Others
3-43