Table of Contents
Advertisement
2) Automatically recoverable errors
Error Description
Cover open error
Power cord disconnec-
tion error
Head high tempera-
ture detection
Board high tempera-
ture detection
*1: The POWER and ERROR lamps blink alternately. If the VM and VCC voltage errors oc-
curred simultaneously, the power cord disconnection error will be displayed even though
the cable is connected to an outlet. In such cases, disconnect the power cord from the out-
let, then reconnect it. Then connect the USB cable to the PC when it power.
3) Non-recoverable errors
Error Description
Head thermistor error
Board thermistor error Flashes at 2-second intervals Flashes at 2-second intervals Non-recoverable
VM voltage error
VCC voltage error
Nonvolatile memory
error
USB error
CPU error
RAM error
Note: 1) If a non-recoverable error occurs, turn the power OFF immediately.
2) If a non-recoverable error occurs, please consult the dealer for repairs.
4) Paper cut error
Error Description POWER Lamp ERROR Lamp Recovery Conditions
Paper cut error
Note: If the cutter does not return to its home position or does not perform the initial move-
ment, it will result in a non-recoverable error.
5) Paper out error
Error Description
Paper out error
POWER Lamp
On
Flashes at 0.5-sec-
ond intervals *1
Flashes at 0.5-sec-
ond intervals
Flashes at 2-sec-
ond intervals
POWER Lamp
Flashes at 0.5-second inter-
vals
Off
Flashes at 1-second intervals Flashes at 1-second intervals Non-recoverable
Flashes at 0.25-second inter-
vals
Flashes at 5-second intervals Flashes at 5-second intervals Non-recoverable
Off
Off
Off
Flashes at
0.125-second
intervals
POWER Lamp
On
ERROR Lamp
On
Flashes at 0.5-sec-
ond intervals *1
Off
Off
ERROR Lamp
Flashes at 0.5-second inter-
vals
Flashes at 1-second intervals Non-recoverable
Flashes at 0.25-second inter-
vals
Off
On
For firmware version 1.1 or later:
Open the printer cover.Remove the cause
(jammed paper) of the error, and close the
printer cover.Then, the printer will be recovered.
For firmware version 1.0 or if the printer cover
cannot be opened because of the cutter lock:
Follow the steps described in section 7-3.
ERROR Lamp
Recovery Conditions
Flashes at 0.5-sec-
Automatically recovered by loading a
new paper roll, then closing the printer
ond intervals
cover.
– 20 –
Recovery Conditions
Automatically recovered after the printer
cover is closed.
Automatically recovered after the power
cord is plugged into an AC outlet.
Automatically recovered after the print
head has cooled.
Automatically recovered after the printer
cover is closed.
Recovery Conditions
Non-recoverable
Non-recoverable
Non-recoverable
Non-recoverable
Advertisement
Table of Contents
