Installing The Discharge Duct In Regions With Strong Wind - Samsung AG010KSV Series Installation Manual

Installing the discharge duct in
regions with strong wind
In windy regions such as near sea shores, protection
wall or wind protection duct must be installed
for normal operation of the product. (Refer to the
illustration of the snow prevention duct, for installing
the wind protection duct.)
When installing a wind prevention duct consider
potential wind direction. If the direction of the
discharge duct is the same as main direction of
prevailing winds, it can cause performance decrease
(wind blowing into discharge duct outlet).
560 (22 1/16) 1795 (70 11/16)
1697 (66 13/16)
2915 (114 3/4)
Unit: mm (inch)
560 (22 1/16)
180 (7 1/16)
Unit: mm (inch)
871 (34 5/16)
765 (30 1/8)
CAUTION
Cautions regarding on installing the frame and selecting
the base ground
The base ground must be solid and the product
must be fixed with anchor bolts.
Make sure to install the product in a place strong
enough to withstand its weight.
If the place cannot withstand the weight of the
product, product may fall and cause personal injury.
When installing on a rooftop subject to strong wind,
countermeasures must be taken to prevent the
product from falling down.
Use a frame that is resistant to corrosion.
Unit: mm (inch)
550 (21 5/8)
180 (7 1/16)
21
English