Table of Contents
Advertisement
Installing the discharge duct in
regions with strong wind
f In windy regions such as near sea shores, protection
wall or wind protection duct must be installed
for normal operation of the product. (Refer to the
illustration of the snow prevention duct, for installing
the wind protection duct.)
f Install the wind prevention duct with the
consideration of major wind direction. If the direction
of the discharge part is same as major direction
of the wind, it could cause product's performance
decrease.
560
1795
DB68-05916A-09_IM_DVM Chiller Outdoor_EU_EN_.indd 21
Unit: mm
560
Unit: mm
1697
2915
871
765
CaUtIon
Cautions regarding on installing the frame and selecting
the base ground
• The base ground must be solid and the product
must be fixed with anchor bolts.
• Make sure to install the product in a place strong
enough to withstand its weight.
If the place cannot withstand the weight of the
product, product may fall and cause personal injury.
• When installing on a rooftop subject to strong wind,
countermeasures must be taken to prevent the
product from falling down.
• Use a frame that is resistant to corrosion.
Unit: mm
550
21
English
2022-05-02 오전 8:59:59
Advertisement
Table of Contents
