Installing Water Temperature Sensor - Samsung DVM Installation Manual

FCU KIT installation
7 Optional external contact interface module (MIM-B14)
If you need an external contact control (for indoor unit ON/OFF, external heater control,
or pump control), use an external contact interface module.
External contact interface module
(Optional)
CN4 CN4
CAUTION
If the provided connection wire (370 mm) is not lengthy enough when installing the
MIM-B14 external contact interface module outside, be cautious not to touch between
wires while in extension.

Installing water temperature sensor

Water temp.
Insulator
Aluminum tape
Rubber tape
26
1 Check the sensor and sensor holder.
NOTE
sensor
Pipe
type
Cable tie
2-pipe Water-IN 1
4-pipe
Location
of Sensor Classification
Connector
Pipe
Water-IN 1
temperature
sensor (Blue)
Water-IN 2
Diameter
Location of pipe
of sensor
Water inlet
pipe
Chilled water
Ø7
inlet pipe
Heating water
inlet pipe