Wire-Connecting To Network - Philips SignageSolutions BDL5535QL User Manual

BDL5535QL
3.6.

Wire-connecting to Network

If you connect this display to a home network, you can play photos, music and videos from your computer. See Play multimedia files via Local Area Network
(Page 14) for more detail.
INTERNET
ROUTER
[RJ-45]
[RJ-45]
PC
To setup the network:
1. Switch on the router and switch on its DHCP setting.
2. Connect the router to this display with an Ethernet cable.
Setup
3. Press [ ] HOME button on the remote control, then select .
Connect to network
, then press [ ] button.
4. Select
5. Follow the on-screen instructions to install the network.
6. Wait for this display to find the network connection.
7. If you are prompted, agree to the "End User Licence Agreement".
NOTE: Connecting with a shielded CAT-5 Ethernet cable to comply with the EMC directive.
13