Table of Contents
Advertisement
Input resolution
Set the resolution of the VGA input. This is only required when the
display is unable to detect the VGA input resolution correctly.
Auto adjust
Use this function to automatically optimize the display of VGA input
image.
NOTE: This item is functional for VGA input only.
Picture reset
Reset all your picture settings to the factory defaults.
5.1.2. Sound
Picture
Sound style
Bass
Sound
Ambilight
Treble
Tiling
Balance
Network
Volume
Storage
Minimum volume
General settings
Maximum volume
Surround mode
Audio Out(line out)
Advanced
Sound reset
Sound style
Access predefined sound settings.
Bass
Adjust to increase or decrease lower-pitched sounds.
Treble
Adjust to increase or decrease higher-pitched sounds.
Balance
Adjust to emphasize left or right audio output balance.
Volume
Adjust to increase or decrease the volume.
Minimum volume
Set the Minimum volume.
Maximum volume
Set the Maximum volume.
Surround mode
Set surround effects for audio performance.
Audio Out (line out)
Adjust audio output volume.
Advanced
Access advanced settings to enhance your audio experience.
•
{Auto volume leveling}: Enable the reduction of sudden volume
changes.
•
{Speaker settings}: Turn on or off the internal speakers.
•
{Clear sound}: Enhance sound quality.
•
{Audio out format}: Choose the type of audio output through
the digital audio output connector. (HDMI only)
•
{Audio out delay}: Automatically sync the image on this display
to the audio from a connected home theatre.
•
{Audio out offset}: Adjust the setting for audio output delay.
Available if {Audio out delay} is switched on.
Sound reset
Reset to default setting.
5.1.3. Ambilight
Picture
Sound
Ambilight
Tiling
Network
Storage
General settings
Ambilight style
Choose a predefined ambilight style.
Brightness
Adjust ambilight brightness.
Saturation
Adjust the color saturation of the ambilight.
NOTE:
For thermal dissipation concern, please do not use this display
in portrait mode with ambient light enabled.
5.1.4. Tiling
Picture
Sound
Ambilight
Tiling
Network
Storage
General settings
With this function you can create a single large-screen matrix (video
wall) that consists of up to 225 sets of this display (up to 15-sets on the
vertical and 15-sets on the horizontal sides).
Enable
Choose to {On} or {Off} the Tiling function. If {On}, the display will
apply the settings in {H monitors}, {V monitors}, {Position}, and
{Frame comp.}.
H monitors
Adjust displays on the horizontal side.
V monitors
Adjust displays on the vertical side.
19
BDL5535QL
Ambilight style
Brightness
Saturation
Enable
H monitors
V monitors
Position
Frame comp.
Switch on delay
Advertisement
Table of Contents
Troubleshooting
