NOTE: T his display's remote control sensor will stop working if the [IR IN] is connected.
3.6.
IR Pass-through Connection
3.7.
Wire-connecting to Network
If you connect this display to a home network, you can play photos, music and videos from your computer. See Play multimedia files via Local Area Network
(Page 18) for more detail.
PC
To setup the network:
1. Switch on the router and switch on its DHCP setting.
2. Connect the router to this display with an Ethernet cable.
3. Press [
] HOME button on the remote control, then select
Connect to network
4. Select
5. Follow the on-screen instructions to install the network.
6. Wait for this display to find the network connection.
7. If you are prompted, agree to the "End User Licence Agreement".
NOTE: C onnecting with a shielded CAT-5 Ethernet cable to comply with the EMC directive.