Table of Contents
Advertisement
Use this menu to change all the settings of the TV and to make a new channel scan. To start the
scanning, select Start at the end of the list and press oK.
All your old settings will be replaced with the new settings.
noTe:
Restore factory Default
Press pq to select Reset, then press oK to enter the sub-menu.
If you are sure to reset, press Yes to reset.
noTe:
software Upgrade (Usb)
Connect a USB device with upgraded software to upgrade the TV system.
software Version
Your current software version is displayed.
4.6.1 Time settings
Press pq to select Time Settings, then press oK or u to enter the sub-menu.
osD Time
Press pq to select OSD Time, press t u to select the duration time for displaying the info bar on
screen, available settings are: Off, 10seconds, 20seconds, 30seconds, 60seconds.
sleep Timer
Set a timer for the TV to turn off automatically.
Press pq to select Sleep Timer, press t u to select. Available settings are: Off, 5 min, 15 min, 30 min,
60 min, 90 min, 120 min, 240 min.
Auto sleep
Auto Sleep helps you reducing power consumption. When set to 3 Hours/4 Hours and 5 Hours, the
receiver will switch to standby if it doesn't receive any commands during this time. Set Auto Sleep Off to
deactivate the automatic standby function
Time Zone
Select your region to set the correct time.
Press pq to select Time Zone, then press oK or u to enter the sub-menu.
Use pq to select your country and consequently your time region. Then confirm with oK.
Autosync Time
When Auto Sync is set to On the TV will display the time provided by the broadcaster. If you choose to set
it to Off you will be free to set the time you prefer by changing Date and Time.
14
For more information about Settings in this menu please refer to chapter
3 first Time installation.
User data on this TV will be completely lost after operating this feature.
English
Advertisement
Table of Contents
