Strong SRT 24HX1001 User Manual page 10

1. q
2. !
3. P.M
4. s.M
5. ZooM
6. 0 ~ 9
7. ReTURn
8. cHn LisT
9. MenU
10. soURce
11. pqt u
12. oK
13. eXiT
14. info
15. nicAM
16. 3D
17. VoL +/-
18. PR +/-
19. sLeeP
20. sUbTiTLe
21. ePG
22. fAV
23. TeXT
24. 4
25. fReeZe
26. u / 2
27. 3
28. 7
29. 8
30. 5
31. 6
32. coLoUR bUTTons
Teletext control buttons (optional)
inDeX
„ „
cAnceL
„ „
HoLD
„ „
siZe
„ „
6
Press to turn the TV on or standby.
Press to mute or restore the volume.
Press to select the desired picture mode.
Press to select the desired sound mode.
Press to the desired picture format.
Press to set the TV channel directly.
Press to return to the previously viewed channel. In USB mode, you can return
to the previous menu.
Press to open the channel list.
Press to enter or exit from the TV menu.
Press to select the input source mode.
Press to select or adjust the desired item on the TV menu.
Press to confirm and execute the selection.
Press to exit from any menu.
Press to display the current information including screen format, source, etc.
Press to select the Audio Language depending on the broadcasting channel.
No function.
Press to adjust the volume.
Press to select previous/next channel.
Press to set the length of time to switch the TV to standby mode.
Press to turn the subtitles on or off.
Press to display the current EPG information in DTV mode.
Press to view your assigned favourite channels. Press pq to cycle through
your assigned favourite channels, press oK to confirm.
Press to enter the teletext menu.
No function.
Press to freeze or unfreeze the picture.
Press to pause playback, press again to continue playback.
Press the stop button to exit full-screen playback.
Press to play the previous file.
Press to play the next file.
Press to fast reverse.
Press to fast forward.
Press to execute the prompt function in DTV mode. Press these buttons that
corresponds to the desired menu or page number use in teletext mode.
Press this button to display the index page.
Press this button to return to the TV programme temporarily while
searching for a Teletext page. When the search is done, the page
number will be displayed on the upper left of the screen. Press again
to return to the Teletext page.
Press to hold the Teletext page on screen without update and
changes. Press again to release the hold state. When not in Teletext
mode, press this button to freeze the picture display. note: In non-
Teletext mode and non-USB mode, the button is "FREEZE".
Enlarge the Teletext display: Press this button once to enlarge the
upper half of the screen. Press this button again to enlarge the
English
Fig. 4a
Fig. 4b