Electrolux END4802X Instruction Booklet page 29

1. If the temperature
values of refrigerator and
freezer compartments are
on the screen
2. If alarm and refrigerator
symbols blink
3. If user hears the
buzzer sound
4. If the screen's color
changes to red color
1. If the screen's color
changes to red and
show s "LO PO"
2. If alarm symbol blinks
Freezer This caution w ill be seen
compartment not especially after long term of
cold enough pow er failure
Ideal temperature for
Refrigerator Refrigerator Compartment is
compartment not +4C°. lf you see this w arning
cold enough your foods have risk of
spoiling.
It is the combination of
Not cold enough Freezer / Refrigerator's not
cold enough error type
Freezer The foods starts to freeze
compartment too because of the too much
cold cold temperature
When the pow er supply gets
low er than 170V the
Low voltage
appliance gets to steady
position
1. Do not freeze the foods that are thaw
and use in short time period.
2. Set the freezer temperature to colder
values or set the super freeze, until the
compartment gets to normal temperature.
Do not put fresh food until this failure is off.
Note: You can push "Ok" button to stop the
alarm functions. The buzzer w ill stop, alarm
and refrigerator symbols w on't blink. But
the screen w ill stay red until the problem is
solved. When the problem is solved it w ill
turn to w hite.
1. Set the refrigerator temperature to colder
values or set the super cooling mode until
the compartment gets to normal
temperature.
2. Do not open the door much until this
failure is off.
Note: You can push "Ok" button to stop the
alarm functions. The buzzer w ill stop, alarm
and refrigerator symbols w on't blink. But
the screen w ill stay red until the problem is
solved. When the problem is solved it w ill
turn to w hite.
Check freezer / refrigerator's not cold
enough conditions.
Note: You can push "Ok" button to stop the
alarm functions. The buzzer w ill stop, alarm
and refrigerator symbols w on't blink. But
the screen w ill stay red until the problem is
solved. When the problem is solved it w ill
turn to w hite.
1. Check if the "Super cooling mode" is on.
2. Decrease the refrigerator temperature
values.
Note: You can push "Ok" button to stop the
alarm functions. The buzzer w ill stop, alarm
and refrigerator symbols w on't blink. But
the screen w ill stay red until the problem is
solved. When the problem is solved it w ill
turn to w hite.
This is not a failure. This prevents any
damages on the compressor. This w arning
w ill be off after the voltage gets required
level.
Note: You can push "Ok" button to stop the
alarm function. The screen stays red and
show s "LO PO" until the voltage gets
required level.
UK - 27 -