Real Time Clock; Ambient Temperature - Electrolux END4802X Instruction Booklet

Real time clock

• Real time clock symbol is selected by pushing to "Function" button for 3 times.
• When the real time is seen on display, you can push to "Ok" button, then you can
adjust the clock by pushing "+" and "-" buttons. If you want to set the values, you will
push to "Ok" button.
• After pushing "Ok" button to set, minute number segment will blink. Also you can
adjust the value by using (+) or (-) buttons. Then you should push "Ok" button to set.
Or after adjusting, you will not push any buttons for 3 sec after it sounds as "beep-
beep". It shows that setting operation is ok.
• Showing real time clock on the screen can be cancelled by pushing the "Function"
button.
• This function is selectable for user. When it is chosen the clock will be seen on the
screen. W hen you push the "Function" button; this function will be cancelled.

Ambient temperature

Showing ambient temperature can be done by pushing "Function" button until the relevant
symbol blinks and the screen shows ambient temperature of the area that is device is
placed.
If you want to cancel this function, you will push "Function" button again.
On/Off Function
On/Off Function
UK - 14 -
+
-
Mode
+
-
Mode
Ok
Ok