Sony MSU-700A Operation Manual page 60

Initial Settings
3
To set the time:
1) Press [Time].
Date/Time Set
1998/ 7 /1
( WED )
11: 47: 51
Date Time
Hour Minute Second
11 47
2) Set the Hour, Minute and Second with the left
three controls.
3) Press [Set] in synchronization with a time
signal.
The set time becomes valid.
To resume the previous setting, press [Cancel]
in place of [Set].
When the clock setting is completed
Press [Exit] to leave this menu.
To adjust the buzzer sound
A buzzer sounds on the MSU-700A when it receives
call signal or a panel control is operated.
When required, you may turn on/off the buzzer or
adjust the sound volume.
To adjust the buzzer, proceed as follows:
1
Press [MSU Adjusting] on the MSU Configuration
menu.
The MSU adjustment menu appears.
Clear
Auto Iris
LED
Buzzer
EL Bright
Bright
26 (E)
Exit
Set Cancel
51
Exit
1
1
2
Press [Buzzer] to set it to inverse video.
The lower half of the display becomes the Buzzer
Volume Level adjustment display.
Clear
LED
Buzzer
EL Bright
Bright
Buzzer Volume Level
Call Touch
Buzzer Click
Call Touch Switch
30 85
3
Adjust the levels with the three control knobs.
Call: Sound volume of the buzzer when a call
signal is received
Touch: Sound volume of the buzzer when a button
displayed on the menu display is operated
Switch: Sound volume of the buzzer when a
button on the panel is operated
The master volume can be adjusted with the right-
most control knob.
To turn on/off the buzzers independently
Press the corresponding button. When it is in inverse
video, the buzzer is on.
[Call Buzzer]: For the buzzer sound when a call signal
is received
[Touch Click]: For the buzzer sound when a button
displayed on the menu display is operated
[Switch Click]: For the buzzer sound when a button on
the panel is operated
To turn off all the buzzers
Press [All Off].
When the adjustment is completed
Press [Home] to return to the MSU adjustment menu,
and press [Exit] to release the menu operation.
Home
1
1
Switch
All Off
Click
Master
68 66