Sony MSU-700A Operation Manual page 41

q;Menu operation block
1
1 MODE (mode select) buttons
Select the menu mode.
If you press and light one of these buttons, the menu
for the selected mode appears on the EL display.
When the lit button is pressed again, it goes dark and
the menu on the display also disappears.
MULTI: Selects Multi-Control menu to set the
requirements for Master/Slave mode to set up
multiple cameras in synchronization.
CARD: Selects IC memory card menu to initialize
IC cards.
CONFIG: Selects Configuration menu to configure
this unit and the entire camera system.
MAINTENANCE: Maintenance mode to set
various camera maintenance items and the H and
SC phases of CCU, etc.
FILE: Selects File operation menu to retrieve and
transfer reference files, lens files and scene files in
the video camera or on IC cards.
PAINT: Selects Paint control menu to adjust various
paint items, such as white, black and flare.
For items of each menu, see "Menu Items" on page 15(E).
MODE
MULTI
CARD
CONFIG
MAINTENANCE
FILE
PAINT
2
3
2 Control knobs (rotary encoders)
Adjust the selected items on the touch panel.
3 EL display/touch panel
Displays the menu selected with the MODE buttons
and permits the displayed items to be adjusted.
7 (E)