Specifying The Security Code - Sony MSU-700A Operation Manual

Initial Settings
For a system using the MSU-700A, you will need to
set parameters for control of your system from the
MSU-700A as well as the operating conditions of the
MSU-700A.
The MSU-700A has Engineer mode, which allows you
to assign cameras to be controlled from the MSU-
700A and limit the operations on the MSU-700A.
To authorize specific persons to use this Engineer
mode, specify a security code in advance. Once the
security code is set, the MSU-700A will enter
Engineer mode when this security code is input.

Specifying the Security Code

You can set, change or delete the security code for
entering Engineer mode as follows:
To set a new security code
Proceed as follows:
Menu operation block
MODE
Configuration Menu
Camera
MULTI
CNU
1
CARD
CONFIG
MAINTENANCE
FILE
PAINT
1
Press to light the CONFIG button.
The Configuration Menu appears on the display.
2
Press [MSU].
The MSU Configuration Menu appears.
Configuration Menu
CCU
MSU
2
MSU Configuration
MSU MSU SW
Adjusting Set
Date /
Time
3
Press [Security].
The Security Menu display appears.
Security Menu
Engineer Mode
4
Press [Engineer Mode] to set it to inverse video.
The Security Menu items now appear.
Security Menu
Engineer Mode
Code
Status
Change
Engineer Mode
5
Press [Code Change].
The numeric keys and field for entering a new code
No. are displayed.
Security Menu
Code Change
7
New Code
Engineer Mode
No:
Code 4
Status
Change
1
0
Engineer Mode
OK
Exit
Security
Exit
Exit
Exit
8 9
5 6
2 3
Cancel
(Continued)
21 (E)