Sony MSU-700A Operation Manual page 46

Locations and Functions of Parts
Operation Panel in Use With HD Equipment
8Camera/CCU function ON/OFF buttons
When this unit is used in an HD camera system (HDC-
700/750/700A/750A/900/950, HDW-700/F900,
HDCU-700/900), another three camera/CCU function
ON/OFF buttons (
see page 6
the unit with the labels for HD system (supplied)
attached to the appropriate positions.
KNEE DETAIL LVLDEP GAMMA
OFF OFF OFF OFF
KNEE KNEE
LOW KEY
SAT
APERTURE SAT
5600K AUTO SKIN DETAIL
KNEE DETAIL GATE
• Right two buttons in the upper row (OFF when
the button is lit)
SD MATRIX OFF: To turn on/off the linear matrix
in downconverting
SD DETAIL OFF: To turn on/off the SD contour
compensation function in downconverting
• Fourth button from the left in the middle row (ON
when the button is lit)
LOW KEY SAT: To turn on/off the low key
saturation function (linear matrix for dark areas)
Connector Panel
1 POWER switch
POWER
I
O
1 POWER switch
Turns on and off the power of this unit.
2 AC IN (AC power input) connector
Connect to an AC power source using an optional AC
power cord. The power cord can be fixed to this unit
using an optional plug retainer.
12 (E)
) become effective. Use
CHROMA MATRIX
SD MATRIX SD DETAIL
OFF OFF OFF OFF
MONO COLOR
COLOR CORRECT
SATURATION CONTRAST BLACK CHARACTER
GAMMA
2 AC IN connector
⁄AC IN
q;Menu operation block/1 MODE (mode select)
buttons
The uppermost MODE button in the menu operation
block ( ) functions as the FUNCTION button
see page 7
both in HD and SD camera systems. Use the unit with
the supplied label attached as shown below.
MODE
FUNCTION button:
FUNCTION
Selects Function menu to control
various camera and CCU functions.
MULTI
CARD
CONFIG
MAINTENANCE
FILE
PAINT
3 CCU/CNU REMOTE connector
4 AUX REMOTE connector
REMOTE
AUX
CCU/CNU
I/O PORT
5 I/O PORT connector
3 CCU/CNU REMOTE (camera control unit/
camera command network unit remote)
connector (8-pin)
Connect to the RCP/CNU connector of CCU or the
MSU connector of CNU.
4 AUX REMOTE (auxiliary remote) connector (8-
pin)
5 I/O PORT connector (50-pin)