Vivotek Supreme SD9374-EHL User Manual page 358

VIVOTEK
8.35 Get wireless signal strength
0)
Note: This request requires Administrator privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/getwlsignalstrength.cgi
PARAMETER VALUE
N/A N/A
8.36 WPS transaction
Note: This request requires Administrator privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/start_wps.cgi
PARAMETER VALUE
N/A N/A
8.37 Peripheral control
devicecontrol > 0)
Note: This request requires Administrator privileges.
Method: GET/POST
Syntax: (for control API)
http://<servername>/cgi-bin/admin/peripheral.cgi?channel=<value>&operation=set
[&washer_mode=<value>] – Set washer mode
[&washer_status=<value>] – Set washer status
[&washer_dwelltime=<value>] – Set washer clean time
[&heater_status=<value>] – Set heater status
Example:
358 - User's Manual
(capability_network_wireless >
DESCRIPTION
Get wireless signal strength.
(capability_network_wireless > 0)
DESCRIPTION
Start WPS transaction.
(capability_peripheral_c<0~(n-1)>_