Vivotek Supreme SD9374-EHL User Manual page 246

VIVOTEK
uart_httptunnel
transmission_mode
network_wire
network_wireless
network_dualmode
wireless_s802dot11b
wireless_s802dot11g
wireless_s802dot11n
wireless_beginchannel
wireless_endchannel
wireless_encrypt_wep
wireless_encrypt_wpa
wireless_encrypt_wpa2
wireless_apmode_enable
wireless_apmode_ssidpref
246 - User's Manual
<boolean> 0/7
Tx, 0/7
Rx,
Both
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
1 ~ 14 0/7
1 ~ 14 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<string> 0/7
This is equivalent
to"capability_camctrl_c0_privilege".
* This is kept for compatibility.
Indicate whether to support HTTP tunnel for
UART transfer.
Indicate transmission mode of the machine:
TX = server, Rx = receiver box, Both = DVR.
Indicate whether to support Ethernet.
Indicate whether to support wireless.
Indicate whether network dual mode is
supported.
* Only available when
"capability_network_wireless" is "1".
* We support this parameter when the version
number (httpversion) is equal or greater than
0305a.
Indicate whether to support wireless
802.11b+.
Indicate whether to support wireless 802.11g.
Indicate whether to support wireless 802.11n.
Indicate the begin channel of wireless network
Indicate the end channel of wireless network
Indicate whether to support wireless WEP.
Indicate whether to support wireless WPA.
Indicate whether to support wireless WPA2.
Indicate whether wireless AP mode is
supported.
* Only available when
"capability_network_wireless" is "1".
* We support this parameter when the version
number (httpversion) is equal or greater than
0305a.
Indicate the prefix of broadcasted SSID when