Vivotek Supreme SD9374-EHL User Manual page 328

VIVOTEK
8.12 IP Filtering for ONVIF
Syntax:<product dependent>
http://<servername>/cgi-bin/admin/ipfilter.cgi?type[=<value>]
http://<servername>/cgi-bin/admin/ipfilter.cgi?method=add<v4/v6>&ip=<ipaddress>[&index=<value>][&ret
urn=<return page>]
http://<servername>/cgi-bin/admin/ipfilter.cgi?method=del<v4/v6>&index=<value>[&return=<return page>]
PARAMETER VALUE
type NULL
allow, deny
method addv4
addv6
delv4
delv6
ip <IP address>
index <value>
return <return page>
8.13 UART HTTP Tunnel Channel
Note: This request requires Operator privileges.
Method: GET and POST
Syntax:
http://<servername>/cgi-bin/operator/uartchannel.cgi?[channel=<value>]
-------------------------------------------------------------------------
GET /cgi-bin/operator/uartchannel.cgi?[channel=<value>]
x-sessioncookie: string[22]
accept: application/x-vvtk-tunnelled
pragma: no-cache
cache-control: no-cache
328 - User's Manual
DESCRIPTION
Get IP filter type
Set IP filter type
Add IPv4 address into access list.
Add IPv6 address into access list.
Delete IPv4 address from access list.
Delete IPv6 address from access list.
Single address: <IP address>
Network address: <IP address / network mask>
Range address:<start IP address - end IP address>
The start position to add or to delete.
Redirect to the page <return page> after the parameter is assigned.
The <return page> should be the relative path according to the root
of camera. If you omit this parameter, it will redirect to an empty
page.
* If the <return page> is invalid path, it will ignore this parameter.
(capability.nuart > 0)