Table of Contents
Advertisement
VIVOTEK
Positions on the Home page
The Preset positions will also be displayed on the home page. Select one from the Go to drop-down
list, and the Network Camera will move to the selected position.
Pan
button: Click this button to start the 360° horizontal auto pan.
Patrol
button: Click this button, then the Network Camera will patrol continuously among the selected
positions.
Pan button
Patrol button
PTZ > Calibrate
This function re-calibrates the home position to the default center to recover any displacement caused by
external forces. Please note that there is no confirm message after using the function, and the calibration
immediately takes place. If, after a long use, a user finds it is difficult to move camera's field of view to a
specific point, use this function to restore the camera's orginal coordinates in pan and tilt motions.
119 - User's Manual
Advertisement
Table of Contents
