Table of Contents
Advertisement
MSAP2000 AAMS User's Guide
IEEE 802.1p Priority
Your MSAP2000 AAMS uses IEEE 802.1p Priority to assign priority levels to
individual PVCs.
Multiple PVC and ATM QoS
The MSAP2000 AAMS allows you to use different channels (also called
Permanent Virtual Circuits or PVCs) for different services or subscribers. Define
channels on each DSL port for different services or levels of service and assign
each channel a priority. ATM Quality of Service (QoS) allows you to regulate the
average rate and fluctuations of data transmission. This helps eliminate
congestion to allow the transmission of real time data (such as audio and video).
IEEE 802.1x Port-based Authentication
The MSAP2000 AAMS supports the IEEE 802.1x standard for centralized user
authentication and accounting management through an optional network
authentication (RADIUS) server or local user database.
Management
•
Remote configuration backup/restore and firmware upgrade
•
SNMP manageable
•
Text-based management locally via console port and remotely via telnet
•
Editable plain text based configuration file
Security
•
Password protection for system management
•
VLAN
MAC (Media Access Control) Count Filter
You can limit the number of MAC addresses that may be dynamically learned on
a port. You may enable/disable the MAC count filter on individual ports.
Static Multicast Filter
Use the static multicast filter to allow incoming frames based on multicast MAC
address(es) that you specify. This feature can be used in conjunction with IGMP
snooping to allow multicast MAC address(es) that are not learned by IGMP
snooping.
IGMP Snooping
With IGMP snooping, group multicast traffic is only forwarded to ports that are
members of that group. IGMP Snooping generates no additional network traffic,
allowing you to significantly reduce multicast traffic passing through your
MSAP2000 AAMS.
21
Advertisement
Table of Contents
