Introduction; Thank You; Features; Precautions - ASA Electronics IN-COMMAND JRVCS105 Installation And Operation Manual

INTRODUCTION

Thank You!

Thank you for choosing iN-Command. We hope you will find the instructions in this owner's
manual clear and easy to follow. If you take a few minutes to look through it, you'll learn how to
use all the features of your new JRVCS105 for maximum enjoyment.

Features

Features of Jensen JRVCS105 system include:

Simultaneous control by up to three Android Devices and one iOS Device

Control two zones of Interior Lighting

Monitor all water tank levels

Control and monitor the Water Heater (switches between LP or AC)

Control and monitor the Water Pump

Control Awning

Control Electric Slides

Control Jacks (non-automatic function)
 Monitor Battery Voltage with Low Voltage Alert

Precautions


Use the Proper Power Supply.
This product is designed to operate with a 12 volt DC, negative ground battery system (the
standard system in a North American vehicle).

Use Authorized Service Centers.
Do not attempt to disassemble or adjust this precision product; contact a professional for
assistance.

Avoid Moisture.
To reduce the risk of fire or electric shock, do not expose this equipment to rain or
moisture.
 Avoid Cleaning Products.
The front of this unit should only be cleaned with a slightly damp cloth. Do not use
cleaning products.

Use Recommended Accessories.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING
INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES.

Packing List

1 Cover, 1 Thumb Screw 1 Body Control Module (BCM)
4
JRVCS105
1 Display Commander (DC)