ASA Electronics iN-Command Pro Plus JRVCS2 Getting Started

GETTING STARTED
The iN•Command® Pro Plus system is comprised
of two parts, the DC (Display Commander or
touch pad) and the BCM (Body Control Module
or main control board). To turn on the DC, hold
the power button until the screen flashes.
When the DC is on, the EULA (End User License
Agreement) screen will display - scroll to the
bottom of the screen and select "Accept".
Next, the Passcode screen will appear. Select
"Change passcode" and enter a four-digit code
you will remember. This passcode will allow the
user access into the iN•Command® interface to
change and/or monitor multiple functions of
the RV. The DC should then connect to the BCM,
and the HOME screen will display.
iN•Command® is equipped with a Safety Lockout feature to ensure certain system
functions are unavailable during transit. When the Brake signal or the Tow signal
is activated, iN•Command® will lock down all motorized functions. The DC and
mobile devices will display "Travel Lockout" and affected buttons will display
"Disabled". To turn the Travel Lock off, the "Unlock" button on the DC inside of the
RV must be pressed.
Get the app
Download the iN•Command® app
to turn your mobile device into the
definitive RV Controller.
www.asaelectronics.com/incommand
HOME screen