ASA Electronics IN-COMMAND JRVCS105 Installation And Operation Manual page 28

5. Select "Tanks" to set resistor reference value for every tank.
6. After setting the values, return to previous screen and select "OK" to save the change.
7.
*The system should be calibrated by the manufacturer and only need to be accessed for
troubleshooting.
** The Administration Passcode is used by the manufacturer for programming and
troubleshooting purposes. Should there be a calibration issue, call ASA Electronics
Technical Support at 1-877-845-8750 or email them at info@asaelectronics.com
28
To calibrate the Touch Screen, select "Set". Follow the instructions.
The DC will restart after calibration.
JRVCS105