Figure 9-1 Menu 11.1 Remote Node Profile For Ethernet Encapsulation; Table 9-1 Fields In Menu 11.1 (Ethernet Encapsulation) - ZyXEL Communications Intelligent Broadband Sharing Gateway P-324 User Manual

Rem Node Name= ChangeMe
Active= Yes
Encapsulation= Ethernet
Service Type= Standard
Service Name= N/A
Outgoing:

Figure 9-1 Menu 11.1 Remote Node Profile for Ethernet Encapsulation

FIELD
Rem Node Enter a descriptive name for the remote node. This field can be up to eight
Name characters.
Active Press [SPACE BAR] to select Yes (activate remote node) or No
(deactivate remote node).
Encapsulation Ethernet is the default encapsulation. Press [SPACE BAR] if you wish to
change to PPPoE or PPTP encapsulation.
Service Type Press [SPACE BAR] to select from Standard, RR-Toshiba
(RoadRunner Toshiba authentication method), RR-Manager
(RoadRunner Manager authentication method) or, RR-Telstra
(RoadRunner Telstra authentication method). Choose one of the
RoadRunner methods if your ISP is Time Warner's RoadRunner;
otherwise choose Standard.
Press [SPACE BAR] to select from Standard, RR-Toshiba (RoadRunner
Service Type
Toshiba authentication method), RR-Manager (RoadRunner Manager
authentication method) or, RR-Telstra (RoadRunner Telstra
authentication method). Choose one of the RoadRunner methods if your
ISP is Time Warner's RoadRunner; otherwise choose Standard.
Note: xDSL users must choose the Standard option only. The Server IP, My Login IP and My Password
fields are not applicable in this case.
9-2
Menu 11.1 - Remote Node Profile
My Login= N/A
My Password= N/A
Server IP= N/A
Press ENTER to Confirm or ESC to Cancel.

Table 9-1 Fields in Menu 11.1 (Ethernet Encapsulation)

Route= IP
Edit IP= No
Session Options:
Edit Filter Sets= No
Edit Traffic Redirect= No
DESCRIPTION EXAMPLE
LAoffice
Yes
Ethernet
Standard
Standard
Remote Node Setup